in ref to br1-12 when it says... "when you are happy with the fit of these tubes, tack weld them together, working on one side of the chassis then the other to minimise any distortion" do they mean tack every tube on 1 side then tack ever weld on the other? as i personaly would normaly do 1 tack on 1 side then 1 on the other to keep it even. Advice welcome!
Also when should i fully weld as i need to move the chassis from the jig to do the rear end. Also i dont have the gearbox or diff yet so i cant do the tunnel enterance or exit yet (end next week)
__________________
Build Cost: .............. lost count a while back.
Skyline Roadster 
Last edited by Eternal : 2nd July 2010 at 07:18 PM.
|
2nd July 2010, 04:41 PM
Threaded Mode