|
|
#1
15th July 2010, 10:06 PM
|
||||
|
||||
D1 D2 D3 & D4
The diagonal chassis tubes mentioned in the title are thinner box section than the other chassis tubes (as you will know).
Just wondering, do i line them up central with the 25mm box or flush with the outer edge of the chassis? Also should i weld the uprights first before fitting them? They're only tacked at the moment, and i might have to grind the tacks back a bit to give enough room for the diagonals. Cheers Dave P.S. I've just updated my build blog if anyone's interested in having a look at a few pics. http://davesroadster.blogspot.com/
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode