![]() |
#1
|
||||
|
||||
![]() Knowing that builders out there have various size of budget and differing build times I thought I'd offer two levels of flat pack. The first being a basic chassis which stops at RS14 and the second being an a near complete flat packed rolling chassis including diff mounts ,wishbones and rear uprights.
All chassis tube angles 45' - 90' are cut with a cold saw so no chop saw blade wobble giving 1-2mm variations. All chassis compound angles and wishbone tubing are cut on a mill. The basic flatpack will comprise of: the main chassis up to RS14 all in 25x25x1.6 ERW box the transmission tunnel for a type9 box (this can be trimed to make MT75) rear suspension mounts CP1+2+3+4+5+6+7+10 16 wishbone brackets 4 damper brackets Total £200 £40p&p The rolling chassis flat pack will comprise of: the basic flat pack plus RP1+2+3(bent rear tub tube) D13 CP8 SW1+2+3 CP15 column mount CP19+20+21 rack mount Full set of wishbones profile cut 25x2 and 19x2 CDS M18x1.5 + M20x2.5 Threaded bushes M20x2.5 stud 44x bush tubes 5mm front plate 2 damper brakets Rear set of uprights 3mm CNC laser cut RU1+2+3+4+5+6 RU7 pre drilled RU8 tapped to M10 Diff mounts DM1 pre drilled to match CP10 +DM2 Total £400 £40p&p If any body is interested please message me throught the forum or email me at talonmotorsport@aol.com
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
Thread Tools | |
Display Modes | |
|
|