#1
|
|||
|
|||
rear tub
Having some trouble with the rear tub - I have cut the piece RP1 to 240mm as per the manual and tacked to chassis, but when I clamped the rails D12 &13 to check all diamensions ok (checked dimension & angles of these parts to book) they appear too long. Is anyone aware that the dimensions for these parts are not listed correctly in manual?
I have D12 as being 359mm with angles 44degrees and 8degrees. D13 as 357mm with angle of 8degree and radius of 9.5mm. I haven't cut RP2 as yet to the angle of 24degrees - depth of 355mm as rear just does not look right. |
Thread Tools | |
Display Modes | |
|
|