Problem fitting pinto engine and gearbox

[filip arvidsson]

Hi
I've just lifted the engine and gearbox into the chassi, which is raised 25mm.
I bolted the engine mounts with rubber onto the engine.
On the right side the mounts clear the chassi with 3mm but on the left side they clear it by 20mm!
The engine and chassi is at the same plane so why do the mounts differ in height? I doubt that the chassi has warped 20mm from welding it.
Should I rebuild the mounts, removing the alloy mounting arms that are original?

Regards
Filip Arvidsson