|
|
#4
21st May 2011, 08:04 PM
|
||||
|
||||
0.583 = 14.8082mm so it looks like who ever programmed the machine misread the drawing saw 15mm which is the rad round the out side instead of cutting a 11mm hole
 Moral of the storey always pull a few samples from the batch before you walk out of the door, the place I get all mine done has been caught out by RU7 & 8 before, if it's not as per the drawing I don't pay for it.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 Last edited by Talonmotorsport : 22nd May 2011 at 10:39 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode