Saturn MX5 Front Upper Wishbones

[andysredmini]

Hi this is a question mainly for Saturn but any answers would be great.

I have just drawn up the wishbones on Autodesk Inventor and am wondering if you kept the angles of the tube from the assumed centre line the same as the book e.g. 17.5deg and 29deg? The only reason I ask is that these dimensions push the tubes to the top of the threaded round bar and wonder if they would be better angled in a bit more to bring them down a little to get a gap from the top for welding.

These are the dimensions I have drawn them at but just want to make sure before I manufacture them.

This is the drawing I have done for reference.

http://bamaroadster.blogspot.com/


Many thanks

Andy