RS2 - Dimensions incorrect? Help!

[mk1]

Hi,

not posted in a while but mainly because Im on build no2 of my chassis (i wasnt happy with the accuracy of build no1 so got busy with the hammer and started from scratch! - this time I decided to paint it with rustproof as i put it together).

Anyhows - I needs some help from the brains of the Forum. I have searched the forum but cant find anything!

Page 43, Fig 4.15 shows the external length of RS2 protruding from the bottom rail as 406.9mm (with total length of RS2 at longest point at 430mm).

Problem is, to achieve 406.9, RS2 total length needs to be cut down (which is what I did). But...having done this (and this dimension being correct) means that RS10 is not square with RS7a/RS5 (ie RS10 - the vertical is out by 1 degree).

Any ideas guys?

My current thinking is that the book is wrong on the RS2 dimension - theres a few errors in the book, Im hoping this is one of them?

Any help much appreciated,

Thx

Martyn