Saturn Side Panels

[twinturbo]

Originally Posted by wylliezx9r

The triangular part goes underneath. You can then use the fixings of your voice to attach it to the chassis. I used self tappers underneath and countersunk m6 Allen head bolts on top with rivnuts. The cutting template that has been posted is good but is only a guide and not completely accurate, as said before do it in card and offer it up. Hope this helps.

Yep, the cutting guide will need a bit of easing on mine to clear the bolts. But it's fine for first fit.

I had the crescent sections and tried them with the GRP rear tub and they would not fit. So they were cut/bashed off.

If your floor is quit thick then the lower lip may need removing on the side panels.

Having panels on transforms the car

TT