#1
|
|||
|
|||
Sierra (bolt-on) driveshafts positioning
Yesterday i concluded the refurbishment of my Sierra driveshafts and CV joints.
A good clean and powdercoating and they look as new. The problem is that when i bought my Sierra diff and driveshafts, thise were dissasembled, i mean the diff had not the driveshafts bolted on but seperate. As you can see in the pics below, one face of the shaft has a "star" stamped on it while the other has a number of circular marks. The question is which face goes to diff side and which goes to hub side? i remember reading somewhere that if you install them the wrong way around, they tend to break! I have ordered a Sierra Haynes manual but if you could help me until it arrives, it goes well. Any help greatly appreciated! Thanks! [Edited on 7/1/12 by DRCorsa] Last edited by DRCorsa : 7th January 2012 at 10:31 AM. |
Thread Tools | |
Display Modes | |
|
|