Another build thread

[skov]

Haha, it does look a bit "Solo Polo Peeper" now you mention it Michael

Johno - that rear wheel is only on there very loosely at the moment, which might be why it's sat at that angle.
I'll try to remember to investigate and take some measurements next time I'm out there.

David, if you look through my photos there should be a load with measurements showing my intended engine position.
Essentially I've just got the sump 40mm below the bottom rail, and the engine offset to the passenger side by 25mm.
I've also purchased an inlet manifold from a Mk2 1.6 recently, which may or may not help with bonnet clearance - watch this space!