#1
|
||||
|
||||
Cooked my brakes!!!
Hi guys,
went on the CKC mag track day at Llandow today, and after a fair few mods to the car from it's original setup I'm happy to report it's handling much quicker on track, and much improved under braking. Everything was going well till I smelled a nasty rotten burning smell... a lap later my brakes were all but gone. Back in the pits I soon discovered that my solid front discs were now a lovely blue colour, and my pads had worn by about 4mm in about half an hour on track. Ok so the cause is obvious, far too much heat. Answers/solutions on a postcard please... I'm happy with the stopping power of the standard sierra 240mm brakes, the solid discs just aren't up to the repeated abuse of a track day, however I don't want to spend big bucks on a huge and unecessary upgrade. (brembo AP etc) What ford standard fit vented brakes are available? What would be required to do a conversion? Has anybody successfully made GRP/carbon brake cooling ducts a-la formula 1 cars? Thanks guys, Sam.
__________________
Check out my Build Blog www.samsv8locost.blogspot.com And here's all my build photo's on a picasa web album http://tinyurl.com/5tbtm46 |
Thread Tools | |
Display Modes | |
|
|