Who built this

[robo]

Its a haynes .Collected the car tonight and before parting with the cash gave it the once over. The guy who built the chassis was an engineer and has made a fantastic job of the chassis and wishbones. Its all in stainless and its all tig welded to a very high standard. The lower front wishbones are that oval tube but again all in stainless. Fuel tank and side panels are also stainless. Someone bought it after he died and started to complete the build to a shit standard with the odd brackets mig welded on . It will only take a few hours to strip it back to where the proper job stopped. I will post up some piccies when its pulled down. Its got a quick rack,new springs and shocks,nose cone,scuttle, sierra rear with drums and push in shafts, steerings connected, tubular exhaust manifold with a side pipe, all new front vented discs and calipers, alloy wheels, headlights, all the wiring which is done, rad is in and mounted ,engine gearbox and prop are all done and pedal box .Not a bad buy for £820

Bob