#1
|
|||
|
|||
Front lower wishbone build
Hi everyone,
I'm fully prepared to be told I'm a complete moron for missing something completely obvious, but here goes anyway... I'm at the stage where I'm building my wishbones. The part thats causing me problems is the frame for supporting the plate (page 57, Fig. 5.4); as far as I can tell it needs to be 5mm higher! The other option would be to tack the plate to the tubes without the 5mm spacers in place... Is this something that I've gotten wrong or just missed someones solution? |
Thread Tools | |
Display Modes | |
|
|