![]() |
#1
|
||||
|
||||
![]() I am about to lose 20% of my workshop space to make room for my laminating area this means my haphazard storage needs sorting before I fall over it in the process. So I'm offering every thing at reduced prices to get it out of my way before I start putting up the new stud work.
3x basic chassis flat packs up to RS14 with type9 tunnels in 1.6mm wall ERW basic plates included £175 each P&P via TNT £30 10 pairs of top front wishones all with very minor surface rust that will clean off with elbow grease and a scotch bright pad £30 a pair P&P via TNT £10 7 pairs left 3 sets of rear wishbones including the M20 adjusters all with very minor surface rust that will clean off £90 postage included uk mainland only 2 pairs of rear uprights set at 30' to suit both disk and drum brakes clean £85 a pair SOLD OUT 3 sets of rear wishbones 2x top and 2x bottom including the adjusters with yellow polybushes fitted,these have been cleaned up degreased sprayed with etch primer and given 2 coats of 2 pack gloss black. These are part of our new 'ready to fit range' £200 postage included uk mainland only message me through here or email me.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 Last edited by Talonmotorsport : 11th October 2012 at 09:45 AM. Reason: amendments |
Thread Tools | |
Display Modes | |
|
|