|
|
#28
20th October 2012, 10:35 AM
|
||||
|
||||
Moved on to the sender/pump assembly yesterday ....it needed to be lengthened by around 6" twisted and angled to be able to put the filter sock into the surge tank so I cut the mounting frame in the middle and fabricated an aluminium extension piece to facilitate all of the above. the Walbro pump was a little slack when mounted so a clamp was altered to help make it a lot more solid
Here is a picture of it sitting as it would be if it were inside the tank.  
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode