Pictures of exhaust manifold Jezzer, sorry it took a while. The only awkward part of reusing the sierra manifold is converting the 2 into 1 manifold to exit the side of the car instead of underneath. If you cut of the pipes at the main flange and the turn the manifold around 180 degrees and reweld onto the manifold, this is fiddly to get it to exit in the right place and you will have to trim the end of the pipes so that they fit squarely onto the flange. You can then purchase some 2" exhaust pipe and a 90 bend and weld to suit to connect the rear silencer.
It is a bit fiddly but is the cheapest way to do it and it does look okay.
Regards...Andy
|
21st December 2008, 11:37 AM
Threaded Mode