|
|
#25
30th July 2013, 08:32 PM
|
||||
|
||||
Hi Tatey,
I sorted the headlight socket adapter this weekend. Basically I cut most of the socket away apart from 20mm from the top and left a spine of about 20mm from top to bottom of the socket. The bottom part where the 1/2" drive goes I didn't touch. The 20mm at the top I cut a slot in for the wires to pass through. I tried it on mine and it works. You get a good half turn on the nut before you have to pull it down and get another bite on the nut....(that sounds wrong).....  I forgot to take a photo but will post one soon and all will become clear. 
__________________
Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction. Albert Einstein http://s1199.photobucket.com/albums/aa472/JohnoSS1/ Johno 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode