Cawthray's Roadster Build

TomC Cawthray's Roadster Build 5th February 2014, 09:24 AM

flyerncle Throttle bodies or carbs ? 5th February 2014, 09:35 AM

TomC Bike bodies from an r6 I... 5th February 2014, 09:43 AM

flyerncle Did not look right,I thought... 5th February 2014, 09:48 AM

TomC Oh yea do the carbs have... 5th February 2014, 09:56 AM

flyerncle Exactly that ,was going to... 5th February 2014, 12:03 PM

K4KEV Nice looking build so far bud... 5th February 2014, 01:25 PM

TomC Cheers lol yes it has!... 5th February 2014, 01:57 PM

TheArf Welcome to the funny farm,... 5th February 2014, 05:04 PM

flyerncle Looked yellow to me,losing... 5th February 2014, 07:17 PM

twinturbo Looked yellow to me in the... 5th February 2014, 07:56 PM

jason 82 Lol ! Says the tango king to... 5th February 2014, 09:01 PM

TomC It looks a different colour... 6th February 2014, 09:23 AM

Oscar Fantastic looking... 6th February 2014, 10:33 AM

flyerncle Yeronge !:p Make sure the... 6th February 2014, 10:34 AM

voucht Very nice looking build Tom... 6th February 2014, 11:07 AM

SeriesLandy Looking good and your making... 6th February 2014, 11:10 AM

TomC Its different stuff, made for... 6th February 2014, 12:22 PM

SeriesLandy These were Ash's fails... 6th February 2014, 06:00 PM

ayjay My rear stays have only one... 6th February 2014, 08:29 PM

flyerncle The daft thing is,so long as... 7th February 2014, 08:56 AM

davidimurray But if your seatbelts are... 7th February 2014, 01:20 PM

flyerncle Agreed David,if you look at... 7th February 2014, 07:19 PM

TomC Wow cheers for all the info... 9th February 2014, 09:17 AM

voucht I can't say for IVA, but I... 9th February 2014, 05:41 PM

davidimurray Before you do anything I... 10th February 2014, 12:22 PM

TomC Don't worry I appreciate the... 11th February 2014, 08:54 AM

rpjg1975 I did exactly that regarding... 11th February 2014, 11:06 AM

jps I've been looking at this... 13th February 2014, 04:12 PM

TomC How do chaps, not much to... 26th March 2014, 02:38 PM

TomC Well safe to say things... 1st April 2014, 10:33 AM

TomC Well the good news is that we... 2nd April 2014, 08:43 AM

TomC How do chaps long time no... 20th June 2014, 12:18 PM

K4KEV pleased to see the tango... 20th June 2014, 01:26 PM

#31

1st April 2014, 10:33 AM

TomC

Junior Member

Join Date: Jan 2014

Location: York

Posts: 12

Well safe to say things didn't quite go to plan. We got the wiring all done but no spark

haven't had chance to have a proper look over it all yet but reading up it seems quite common so we have a few things to double check. We're using an edis 4 unit with a microsquirt v3 ecu.

Obviously the earths on this pic are just temp.

__________________
Zetec Roadster in progress

Our Build Blog

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode