MX5 based build thread

[CJ27]

Evening all!

I managed a good few hours on the build tonight with some good progress (well I think so)

So I left yesterday with the base rails tacked down and the front frame aligned and tacked, today I moved on the seat rails, uprights and some top rails.

I started by tacking in the two rear seat rails SB1 and then U4 and U5.




I then got d8 roughly in place and then TR4 and D10.

All clamped in place and measurements checked


I checked, checked and checked the measurements and then tacked them in, I forgot to mention I put SB2 in place also.