|
|
#2
26th September 2016, 10:38 AM
|
||||
|
||||
westfield set seiw at 146 front and 160 rear, sump clearance I would not like to be less than 80mm for road use.
__________________
Be Lucky, Mike. 
|
|
#3
27th September 2016, 12:10 AM
|
||||
|
||||
|
For the book Haynes Roadster, with the lower wishbones horizontal, it works out at about 11 cm front, 12.5 cm back, give or take 1 cm. Since the engine sits 25 mm lower than the chassis in the book design, the ground clearance at the sump is about 8-9 cm.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
|
#5
27th September 2016, 06:20 PM
|
||||
|
||||
|
Have you seen this? https://grabcad.com/library/haynes-roadster-chassis
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
|
#6
27th September 2016, 10:29 PM
|
|||
|
|||
|
Mine is set at 140mm front and rear but with the sum p a bit lower ish
__________________
My build blog here http://ianhaynes20.wordpress.com
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
