#1
|
|||
|
|||
Ru1
RU1 shows a dimension of 96mm to the 13mm hole but not the distance from the side to the centre. Can anyone enlighten me?
|
#2
|
||||
|
||||
Looking at the drawing on page 178 it gives a radius of 18mm, in the absence of any other data on the drawing I assumed that the hole centre was 18mm in from the side of the plate
That's the measurement I used, upright now fitted on the car & all is fine
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#3
|
|||
|
|||
thanks Ronnie. I'll go with that
|
Thread Tools | |
Display Modes | |
|
|