![]() |
#1
|
|||
|
|||
![]() Hi all. Thought I had better create a post and let you all know about another new build!
Have got my build table 99% completed, just need to get the lines drawn on. I have my chassis on order: a flat pack from Handy Andy. Thank you for all the help Andy ![]() If anyone is considering ordering one of these from Andy, do so with confidence, very helpful, patient and will answer any queries you have promptly. Can't wait for everything to arrive, so I can get cracking. Now only need to source a donor............ Cheers Ryan |
#2
|
||||
|
||||
![]() Hi Ryan,
you,re too kind , blushes ![]() i,d like to wish you the very best with your Roadster build, a donor will turn up, usually when you,re not looking for one ![]() suggest a little tip for marking out your build table....... leave a 25mm space at the nose end, this is so when you fit the front frame you can clamp it to the table to aid tack welding it into position ![]() your flat pack kit will be with you soon, hmmmmm i wonder if you,ll have it built by christmas day??? ![]() all the best andy |
#3
|
||||
|
||||
![]() Ryan,
Good luck with your build, there is loads of great information on this forum, ![]() When I marked out my table I had no steel so decided to take my time with the marking out!! 3 attempts it took me, ![]() ![]() Have fun. Cheers Ginge.
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! ![]() Build Pictures Build Thread |
#4
|
||||
|
||||
![]() I took the cheats way out with the build table and managed to get hold of HandyAndy's. Complete with pre drawn lines, welding splatter and lots of coffee stains
![]() ![]() ![]()
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting ![]() |
#5
|
||||
|
||||
![]() Quote:
![]() as for colour....... you bin Tango,d ![]() cheers andy ps Ryan.... beware of when its time to paint the chassis ![]() ![]() |
#6
|
||||
|
||||
![]() I am seriously thinking about powder coating after getting eyes on Ash’s roll bar. There is a place 10 mins from me I might pop down and get a quote, that doesn’t cost anything!
![]()
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now! ![]() Build Pictures Build Thread |
#7
|
||||
|
||||
![]() Quote:
![]() ![]() its one of those jobs thats very satisfying when completed but a pain to do ![]() like you say Ginge.... a quote costs nowt ![]() andy |
#8
|
||||
|
||||
![]() Well done on taking the first big step of your build
![]() You'll be off to a flying start with one of Andys chassis kits ![]() Will follow your build progress with interest ![]() ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#9
|
|||
|
|||
![]() Cheers guys, I'm a little nervous about doing the lines if im honest! I know it has to be spot on so I'm taking my time (or putting it off!) I think thats a job that I will have to delegate to my co-builder!
As for painting the chassis there is a powder coating company down the road. I might pay them a visit for a quote when the time comes. Any more hints or tips then for getting the lines drawn on? Cheers Ryan. |
#10
|
||||
|
||||
![]() Yea you'll need these...
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|