#1
|
|||
|
|||
front/rear camber adjusters help!
as above got my rear/front camber adjusters today. do the slide in from the front of the wish bone or from the back, leaving the bolt face on the inside??
hope this makes sense |
#2
|
||||
|
||||
Which ones front or rear?
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
|||
|
|||
[quote=twinturbo;33774]Which ones front or rear?
both mate lol |
#4
|
||||
|
||||
They can only go in one way.... the other way will leave the hub mounting point on the inside of the wishbone. Or are you talking about the quick adjusters, so you can adjust the camber without taking the wishbone off the hub? Cos they do go in from the back.
|
#5
|
||||
|
||||
Quote:
Hope that makes sense. AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#6
|
|||
|
|||
yeh the camber quick adjusters. the go in from the back then? and then ur top ball joint screws in from the front then lock it off with the nut on the actual wish bone tube?
|
#7
|
|||
|
|||
is this the same for front and rears?
|
#8
|
|||
|
|||
The adjusters go in from the back with the lock nut at the front(hub side of things)....Lets you adjust things without cocking about taking things apart.............simples
And you should have the rear lower bones with adjustable toe in and out. |
Thread Tools | |
Display Modes | |
|
|