Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Engine/transmission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #41  
Old 12th March 2010, 12:34 PM
Big Vern Big Vern is offline
Senior Member
 
Join Date: Jul 2008
Location: Milton Keynes
Posts: 320
Default

Hi Andy,
Thats the chart I have so you should be ok as the Haynes Roadster is not on the Analyser data base or In-service manual so they can have no exact match for exhaust emissions. (the database is from the type approval specs for each mass produced vehicle when approved-data submitted by OEMs.)
As the haynes roadster won't be there the test will default to non cat emissions.

Russ,
The vehicle effective date in the case of the haynes roadster is the date of the engine used. (Why they're so fussy about proff of the engines age).You could use a '93 Ford Ranger engine is you wanted and as there's no EU emissions spec for it, it would have to go non cat.

The above is why the correct details on your log book are needed as the MOT test is based on the vehicle description in the log book.

I think some people have got confused thinking the vehicle description for the emissions test is for the engines donor vehicle not the vehicle being presented for test.
This chart is the same one as the SVA one and plenty of people got pre '95 engines through without cats.

HTH BV.

PS sorry Andy just re read your post. Yes if the donor cars engine had not cat the in it would also go through on non cat test.
Didn't mean to get you into hot water over the link to IVA bloke but your contact there would be a good way of checking on this.

Last edited by Big Vern : 12th March 2010 at 12:39 PM.
Reply With Quote
  #42  
Old 12th March 2010, 12:49 PM
Russ_16v Russ_16v is offline
Member
 
Join Date: Mar 2010
Location: North Wiltshire
Posts: 48
Default

Brill, thanks mate that makes sense, it can get so confusing!

Im thinking that a CVH/Pinto route still seems to be the easiest route, as i will end up with a Zetec i think
__________________
www.southwest-autos.co.uk
Reply With Quote
  #43  
Old 12th March 2010, 01:07 PM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default

Quote:
Originally Posted by Russ_16v View Post

Im thinking that a CVH/Pinto route still seems to be the easiest route, as i will end up with a Zetec i think
if you will go to Zetec eventually, be aware that the exhaust on a pinto is on the drivers side, but the cvh & zetec are both on the passenger side, if poss go with a cvh as when you fit a zetec you,ll have the exhaust on the same side & won,t need to cut more holes in the side panel of the body

hth.

cheers
andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
  #44  
Old 12th March 2010, 01:12 PM
Russ_16v Russ_16v is offline
Member
 
Join Date: Mar 2010
Location: North Wiltshire
Posts: 48
Default

Cheers Andy, CVH it is then!

Unless i can wangle saying an early Zetec came in a non cat car which i think is pretty much impossible!
__________________
www.southwest-autos.co.uk
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 11:45 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.