![]() |
#1
|
|||
|
|||
![]() Hey All,
What is the spec of the tube that you have used for the cros tube on the roll bar, the book says 33.7 but doestn state a size from memory? I guess CDS but what size?? Cheers P. |
#2
|
||||
|
||||
![]() I think i used 3mm wall tube
__________________
http://www.flickr.com/photos/3326151...7611049241239/ |
#3
|
||||
|
||||
![]() I used a spare length of the wishbone tubing that I had kicking about, 33.7 OD
![]() However after a re-read of the IVA manual .... I don't think I have placed it high enough ![]() The question of cross bar tube size was talked about recently .... it would appear that my crossbar is a tad on the light side ( Can't find the thread ) ![]() If I have to change the height .... Going to go for some 40mm OD tube with a wall thickness of 3mm .... Seamed or seamless tube, I doubt it will make a great deal of difference ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#4
|
|||
|
|||
![]() Cheers, i thought I had seen a thread about it but for the life of me I can't find it. Sure someone will know.
5.5m of 38.1 x3.25 CDS £49 - does this seem good price?? Seeing as it will hold me in my seat should the fan really turn brown I dont mind the cost ![]() |
#5
|
||||
|
||||
![]() I mentioned it on the other thread, so may as well say here too,
I,ve used scaffold bar, its mega thick walled ( approx 5mm ), plus it was free from some building work on the house ![]() fits a treat too, nicely proportioned to the roll hoop & my back stays. Ok ok, i know its not CDS but if the wotsit hits the fan enough for that to bend then i,ll be a gonner anyways . cheers andy |
#6
|
|||
|
|||
![]() Handy - your scaffolder is going to be well upset when he realises you have had it away with half his scaffold
![]() |
#7
|
||||
|
||||
![]() Quote:
![]() ![]() its a bit that "got left behind"..........honest guv ![]() saying no more ![]() cheers andy |
#8
|
|||
|
|||
![]() Sorted
![]() Standing out in the workshop having a smoke. Staring at a length of steel pipe 42.5mm OD x 3.5 wall. ![]() It has been there all along plus about another 8m that I moved out when I moved in. |
#9
|
||||
|
||||
![]() Quote:
![]() ![]() now thats a plan ![]() cheers andy |
![]() |
Thread Tools | |
Display Modes | |
|
|