Camber Adjuster Failure Warning!!!

[flyerncle]

I think it could be solved easily and the cause is pobably our own fault,if the adjuster is in tension due to the tube being too long when tightened it will fail due to the weakest point being the nut end.

Solution.(possibly) the tube should be the exact length to hold the adjuster in compression, or weld a suitable washer at the outside end to prevent it detaching from the arm.
Another alternative is to remake the tube with an internal step at wheel end to stop it pulling through.

It made sense to me at silly o'clock this morning and I hope it does to others.

Cheers All