Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Running gear
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 1st February 2010, 05:33 AM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default shocks

Just a query regarding shocks,i know certain aspects have been covered before but my question is regarding shock length.
Are the shocks 13" open + 1 inch extension making them 14" or
13" open including the 1" extension?
My interpretation is they are 13" open incl the 1" extension,only ask as have shocks supplied by OBP which are 14" eye to eye they do have the 1" ext, OBP are insistent they are correct and i dont think so.The box unfortunately does not have the part numbers on.
I note that on Saturn cars website they list them as 13".

Last edited by ozzy1 : 1st February 2010 at 05:37 AM.
Reply With Quote
  #2  
Old 1st February 2010, 09:43 AM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Hi ozzy1

The shocks should be 13" open & 9" closed

It was found that after road testing the proto-type the Roadster could benefit from a little more ride height.
This was achieved by the addition of 1" extensions on the top of the shock.

This gave 1" of extra ride height whilst still maintiaing the full range of damping action of the shock.

To sumarise....... 13" open length + 1" extension ....... 14" eye to eye overall length.

It looks as if your OBP shocks are fine & to the correct spec
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #3  
Old 1st February 2010, 10:12 AM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

Ronnie is spot on there Oz, shocks should be 13" with a 1" top hat extension and 1.9" id.

AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #4  
Old 1st February 2010, 10:32 AM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default

Cheers guys,was hoping they were correct as got stung on import duty and gst(vat) on top so didnt fancy having to send back to the uk ,then having more sent out.
Reply With Quote
  #5  
Old 22nd March 2010, 07:57 PM
Peter-C Peter-C is offline
Senior Member
 
Join Date: Jul 2008
Posts: 281
Default

I've made up the dummy shocks which are 13" between centres, can anyone confirm if this is correct. Looking at the car it would seem to be riding a bit high. Unfortunately my garage floor is a shade uneven so its difficult to measure it.

Cheers

Peter
Reply With Quote
  #6  
Old 22nd March 2010, 09:48 PM
squbti's Avatar
squbti squbti is offline
Senior Member
 
Join Date: Apr 2009
Location: västervik/sweden
Posts: 198
Default

so if i got 13" i should change them to 14"? is the eye to eye14"?
will 13" eye to eye work?
cheers
Reply With Quote
  #7  
Old 22nd March 2010, 11:33 PM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

You could try them first Squbti, the 1" top hat was added to the original 13" dampers just to increase the ride height. You will probably find that the car is too low.

Kevin at Protech Shocks would add 1" top hats to the dampers for a small fee, assuming they are protech though i'm sure Gaz would do the same.

AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:46 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.