#1
|
|||
|
|||
Another pedal box question
Today I've started on my pedal box but for the large plate I haven't any 3mm. I've loads of 2mm. Could I use one with some support or maybe two of these instead ?
Cheers Peter |
#2
|
|||
|
|||
The pedal box takes quite alot of pressure when you jump on the brakes so i wouldnt think 2mm would be up to the job
I would personally make the effort to get hold of some 3mm plate rather than double up the 2mm, Its a car you will have for years to come so just do it proper first time round Its alot easier than doing it at a later date when its on the road |
#3
|
||||
|
||||
3mm??
My brake and clutch pedals are 5mm the throttle is 3mm, not quite so much pressure on that one.. .well most of the time
__________________
. . David. Heaven, Warm days and Cool rides |
#4
|
|||
|
|||
Quote:
Same here though, 3mm for the throttle, clutch and brake out of 5mm, the clutch seemed a bit flimsy out of 3mm |
#5
|
||||
|
||||
__________________
. . David. Heaven, Warm days and Cool rides |
#6
|
||||
|
||||
Quote:
AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#7
|
|||
|
|||
Cheers Lads
|
Thread Tools | |
Display Modes | |
|
|