|
|
#1
3rd May 2010, 01:37 AM
|
||||
|
||||
Steering rack extensions
Hi folks
as some of you may know, I recently bought a part finished roadster build. Included in the sale were a set of steering rack extensions. They are made in steel, and they will add 145mm to the steering rack when fitted. This tallys up with the haynes manual, but I've seen comments about a revision to this measurement. Will I need to buy new extensions, and if so, what size. All help greatly appreciated. Alan 
|
|
#3
27th May 2010, 08:55 PM
|
||||
|
||||
|
Just come accross this problem too. Shouldn't be to hard to fix though, just hacksaw off the required amount from the end, turn down to the required diameter in far enough for it all to fit and re-tap the thread?
Josh
|
|
#4
27th May 2010, 09:35 PM
|
||||
|
||||
|
These are the correct extensions, 120 to 130mm or Rally Designs do a similar one:
http://www.saturnsportscars.co.uk/st...d&productId=49 Cheers...AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
|
#5
27th May 2010, 10:11 PM
|
||||
|
||||
|
I got a pair just like that
 TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#6
28th May 2010, 01:09 AM
|
||||
|
||||
|
Quote:
  cheers andy
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
