Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 1st June 2010, 02:15 PM
davidimurray's Avatar
davidimurray davidimurray is offline
Senior Member
 
Join Date: Jan 2009
Location: Near Cardiff
Posts: 742
Default Reccomend a .. Battery Drill

Right - with lashings of black paint all over the chassis it is going to be time to start panelling and fixing things on for real soon

My £9.99 tesco electric drill is starting to get loose bearings after two years of real hard abuse (inc probably over 100 hours of wire brushing) so I'm thinking it's about time to get a new drill. With all the drilling on the chassis coming up I'm thinking a battery drill might be a good idea - but which one. Ideally I want 2 batteries and don't want to break the bank.

Any reccomendations??
Reply With Quote
  #2  
Old 1st June 2010, 02:48 PM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

I have had AEG drills for a while now and have been very good with good after sales service. I am sure they still have a 3 year warranty with lifetime on battery and you get 2. New colours look a bit naff though.

AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #3  
Old 1st June 2010, 02:59 PM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

This it what I replaced my Bosch cordless drill with

B&Q Power Pro cordless drill

A fair bit more oomph than my last 14V one

I guess it'll never be the same quality as a Makita or the likes but is a good budget choice.
Best of all, if you kill it B&Q are good when it comes to exchanges or re-funds

All in all decent battery life if you don't try drilling Quartz or 13mm holes in mild steel all day
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk

Last edited by Bonzo : 1st June 2010 at 05:18 PM.
Reply With Quote
  #4  
Old 1st June 2010, 03:12 PM
Headshot Headshot is offline
Senior Member
 
Join Date: May 2010
Location: Cambridge
Posts: 169
Default

Screwfix were doing makita combi drills for £80

I use Makita professionally and can't fault them

They do 12v 14.4v and 18v options, I have a 14.4 and an 18, I also use a 14.4 impact driver, with a socket adaptor its great at removing slightly rusted nuts and bolts
__________________
Failed builder
Reply With Quote
  #5  
Old 1st June 2010, 03:26 PM
Davey's Avatar
Davey Davey is offline
Senior Member
 
Join Date: Dec 2009
Location: Telford
Posts: 1,040
Default

I have two 18v Ryobi drills, came as a kit with two batteries and charger in a nice carry bag (that now does service as a peg bag for my awning on the motorhome). The two drills are a standard drill/driver and a right angled drill. From memory the whole kit was about £130 which is pretty good value as the right angled drill alone is about £100 from other manufacturers. Quality is as good as any other make I've used including Makita, Bosch and DeWalt. I also have a B&Q Pro Power 18v drill driver which is a superb piece of kit and very heavy duty, it has survived being dropped 12 feet onto concrete several times and still works well but it is a heavy piece of kit. Don't bother with cheapy brands as they're just not up to the job, I tried a cheapy B&Q jobbie before I got the Pro Power unit and first time I tried to drill into soft concrete blocks with the hammer action the gearbox disintegrated.

D.
__________________
visit my website at www.cossie.davenewell.co.uk
Reply With Quote
  #6  
Old 1st June 2010, 06:36 PM
tkpm tkpm is offline
Senior Member
 
Join Date: Sep 2009
Location: Bideford, Devon
Posts: 711
Default

I have had a similar problems with the the B&Q Pro Power stuff i'm now using these,

http://www.screwfix.com/prods/84942/...-Standard-Duty

Been using them daily for the last two years without any problems.

Terry
Reply With Quote
  #7  
Old 1st June 2010, 06:41 PM
alga's Avatar
alga alga is offline
Senior Member
 
Join Date: Feb 2009
Location: Vilnius, Lithuania
Posts: 1,249
Default

I have a set of Makitas, a drill/screwdriver and an impact driver. Two really small and light tools with tiny lightweight Lithium batteries. But it's amazing how much grunt they have and how long the battery lives. It's these two in a box plus a battery charger:

http://www.makita.eu/katalog/showite...temID=DF030DWE
http://www.makita.eu/katalog/showite...temID=TD090DWE

Since there's two of them there's a spare battery at hand.

The impact driver is great for doing wheel lug nuts, winds them up to about 30 Nm and only about a half turn remains to torque them up to 100 Nm.

Cost me about 150 quid for the set. I had them for 1.5 years, no regrets.
__________________
Albert
Haynes Roadster FAQ | Haynes Builder Locations
Gallery, build thread in Lithuanian / via Google Translate.
Reply With Quote
  #8  
Old 1st June 2010, 10:39 PM
MightyMouth MightyMouth is offline
Senior Member
 
Join Date: Mar 2007
Posts: 132
Default

If you want something that lasts and that you can get batteries for next year and the year after then either Makita or DeWalt are the way to go.
Reply With Quote
  #9  
Old 1st June 2010, 10:52 PM
Davey's Avatar
Davey Davey is offline
Senior Member
 
Join Date: Dec 2009
Location: Telford
Posts: 1,040
Default

IMHO DeWalt are like Snap on, good quality kit but vastly overpriced. I've used Makita, Bosch, DeWalt, Ryobi, B&D, B&Q Power Pro and even a woolworths job in the past and most of the better named stuff is of similar quality. My B&Q Pro Power drill's battery started to fail after three anda half years so I phoned the helpline No (written on the side of the drill) and asked how much for a new battery? "No problem sir we'll send you one right away" Me: but how much is it? Them: "no cost sir" and true to their word two days later I received a brand new battery for it completely free of cost (nearly said charge there ).

D.
__________________
visit my website at www.cossie.davenewell.co.uk
Reply With Quote
  #10  
Old 2nd June 2010, 12:28 AM
AshG's Avatar
AshG AshG is offline
Super Moderator
 
Join Date: Jul 2008
Location: Rochester
Posts: 1,882
Default

i had 14v a green bosch combi and after 3-4 years of daily abuse i couldnt kill it. it was the 1hr30min carge time that annoyed me in the end. finally gave it to my dad and got a blue professional 18v LiOn bosch. it come with 3 batterys a 30min charger and hard carry case. its great as i can charge two batterys before i even run one out which is really important for me when im on a rampage.
__________________
My Roadster Is Finished NerNer.......
Pigs can fly, you just have to carry them onto the plane.

My Pictures
http://s707.photobucket.com/user/ashgardiner/profile/
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 12:05 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.