|
|
#1
25th December 2009, 07:31 PM
|
||||
|
||||
Weights of Sierra components
Today I weighed the various Sierra components on a bath scale out of curiosity. I guess these numbers might be useful to someone. These bits came off a 1987 2.0 carbed Sierra sedan.
Bare rear subframe with rear rocking arms 33 kg Final drive 21 kg Front hub with a caliper (Teves) and a disk 13 kg Rear hub, drum brake (Girling), bearing carrier, spindle, cable 11 kg Propshaft, with middle bearing 8 kg Half-shaft with both CV joints 6 kg Steering wheel with upper half of the steering column 4 kg Steering rack, with tie rod ends and the lower column part rusted on 5 kg Last edited by alga : 25th December 2009 at 07:34 PM. 
|
|
#2
26th December 2009, 12:46 PM
|
||||
|
||||
|
Will be useful later cheers.
__________________
Sent from my iPad, from who knows where in the world I was building but I am not now!  Build Pictures Build Thread
|
|
#3
6th September 2010, 10:22 PM
|
||||
|
||||
|
What you see here weighs around 260 kg... Hard to believe, considering that the bare chassis weighs only 70 kg, but nevertheless true.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
