![]() |
#1
|
|||
|
|||
![]() Hi guys,
I'm gonna be making up some dummy shocks to sit my build on and wanted to check the rough size I should make them to me as close as possible to sitting the right height? On a conversation with Handyandy I think he mentioned 14" but can't remember to be sure. Does this sound about right? Cheers Russ |
#2
|
||||
|
||||
![]() I was just about to ask the same question.
and what is the dimension of the hole centre to hole centre. and hole diameter. |
#3
|
||||
|
||||
![]() Hi folk's
The free length of the standard shock is indeed 14" & ( Eye to eye ), that length will be just fine so as you can get to wheel a rolling chasis about ![]() I guess if you wanted to simulate a completed cars ride height you could reduce them to about 12" or so ? Never thought to measure the free length of my shocks when I had the engine & gearbox fitted in my rolling chassis ![]() M12 bolt Deano
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#4
|
|||
|
|||
![]() brilliant, cheers bonzo
|
#5
|
||||
|
||||
![]() Cheers Bonzo.
|
#6
|
||||
|
||||
![]() Quote:
What he said ^^^^^^ ![]() cheers andy |
#7
|
|||
|
|||
![]() Aim for a bottom rail chassis height of 4 to 4 1/2 at the front and 5 to 5 1/2 at the rear.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
![]() |
Thread Tools | |
Display Modes | |
|
|