#1
|
|||
|
|||
Project For Sale (well... a pile of donor bits at least)
Happy Haynesters...
It pains me to say this, but after nearly a year of no work on the project, I think its finally time to let it go. As has been spotted on my build website, I've done nothing since last November. Two reasons for this; new job leaving little spare time and a gorgeous baby boy born in Jan eating what other time I had left So, I have the following stuffed into my (and the mother-in-laws) garage: 1600 pinto with all parts (starter motor, clutch, carb, etc) Type 9 gearbox - fully cleaned and degreased All drive shafts and half shafts Rear diff Front hubs - stripped apart with new bearings waiting to go in Front and rear brakes - front cleaned, rears stripped down 5 alloy wheels with good tyres off the Sierra donor Full wiring loom from Sierra donor All clocks and gear stick gator Haynes Front nose cone in black 2 x Maxi ball joints Steering column and wheel with keys Old Sierra steering rack V5 and chassis plate from donor - currently on SORN so new owner can register an age related plate Steel build table with plywood top Basically, this should be everything to bolt to a chassis to get to the rolling/driving stage. Some parts have been cleaned & degreased, others are exactly as they came off the car. There's might be more stuff, once I uncover it all from the garage. Best to look though the pics on my blog. Anyone interested will prob need a van and some strong mates to move the engine (i've got quite a steep drive! ) Looking for a builder to give these parts the new life they deserve, offer me a sensible price and take the whole lot home. Either PM or email: john at beardyjohn dot com Cheers Beardy John
__________________
www.beardyjohn.com Build blog and associated ramblings (Updated - 17/07/09) |
#2
|
|||
|
|||
Roadster Parts
Hi John
Sent a PM regarding bits. Cheers Alex |
#3
|
|||
|
|||
Replied!!
BeardyJohn
__________________
www.beardyjohn.com Build blog and associated ramblings (Updated - 17/07/09) |
#4
|
|||
|
|||
PM sent,
Thanks, Darryl |
#5
|
|||
|
|||
you still got all this mate?
give me PM with a price |
#6
|
|||
|
|||
would you consider splitting?
__________________
Failed builder |
#7
|
||||
|
||||
Hi BJ,
I'm interested in the Steering column if the steering lock still works. how much you after for it? |
#8
|
||||
|
||||
Pm Sent regarding parts
|
#9
|
|||
|
|||
Hi have you still got the nose cone and if you still have the diff what ratio is it
|
Thread Tools | |
Display Modes | |
|
|