#1
|
|||
|
|||
help help
i am thinking of going down the bike engine root. iam just wondering what is the best diff too use and ratio too. fireblade/r1 engine.
|
#2
|
||||
|
||||
Thats a bit like asking how long a piece of string is. What will the car be used for 80% of the time? Is it going to be a trackday car or to be used on the road?
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#3
|
|||
|
|||
road use all of the time
|
#4
|
||||
|
||||
Depends what u want really. 3.92 mental acceleration but low top end and reving its nuts off on the motorway.
Personally had a 3.62 with a zx9 motor and was still quick as f*$k but much nicer to drive everyday. Other option is buy a 3.92 and try it and if u dont like it buy a 3.62 as its an easy swop . ( a piece of string is double its length from the centre !!!!!!!!!!!!) |
#5
|
|||
|
|||
One of the guys I rent a barn with is doing an R1 Locost, all the calculations say 3.38 ideal, 3.6 max's out at 110 and you spend all the time with a screaming engine.
3.9 would max out at 95 and gear changes would frantic |
Thread Tools | |
Display Modes | |
|
|