#1
|
|||
|
|||
2.0 Doner
I have just collected my doner, a very tidy 2.0 EFI pinto with 165000Km on the clock and a service history all the way to 140000. The engine runs like a dream the only problem I have found is a small oil leak around the rocker cover.
|
#2
|
|||
|
|||
picy is too small to see but all the old pinto leaked a bit around the rocker.
its the way the rockercover and gasket is designed me thinks nothing to worry about |
#3
|
||||
|
||||
Most leak all over the place due to lack of maintenance on the breather.
Same goes for a lot of engines, breathers are often overlooked. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#4
|
|||
|
|||
I was trying to make the photo bigger but I was told it was too big I will try again
|
#5
|
||||
|
||||
Pinto engines are very prone to leaking arround the rocker cover.
They use a cork gasket & are often over / incorrectly tightened Fit a new gasket & all should be well
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
#6
|
||||
|
||||
yep, probably about 14LBft will do, which is just nipped up. Any more and you crush the gasket and risk warping the rocker cover.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#7
|
|||
|
|||
I hope this works this time here are the pics of my donor
23112010240.jpg 23112010244.jpg 23112010242.jpg 23112010247.jpg |
Thread Tools | |
Display Modes | |
|
|