Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > SVA/Legal
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 19th December 2010, 06:43 PM
misty misty is offline
Senior Member
 
Join Date: Jul 2010
Posts: 262
Default steering wheel

has anyone any idea what is the legal size of the smallest steering wheel or is there any?
Reply With Quote
  #2  
Old 19th December 2010, 07:31 PM
spud69's Avatar
spud69 spud69 is offline
Senior Member
 
Join Date: Jul 2008
Location: Hartlepool
Posts: 1,678
Default

As far as i can remember Misty there isn't one. All it says is that it must have a padded centre. I think the only relevant one says that "the steering must operate smoothly from lock to lock without undue stiffness" smaller the wheel the stiffer it is.

Sit to be corrected......

AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com

Regards..........AndyH
Reply With Quote
  #3  
Old 19th December 2010, 09:57 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Dont think you are allowed holes in the spokes either.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #4  
Old 19th December 2010, 11:54 PM
misty misty is offline
Senior Member
 
Join Date: Jul 2010
Posts: 262
Default

many thanks to all
Reply With Quote
  #5  
Old 9th February 2011, 08:56 PM
David_17's Avatar
David_17 David_17 is offline
Senior Member
 
Join Date: May 2010
Location: Teesside
Posts: 544
Default

Anyone got ideas on how to 'pad' a wheel for iva?
__________________
~

My Build Diary - http://davesroadster.blogspot.com/

*updated 7/6/11*

Best bit so far: Getting it running
Worst bit so far: Cutting steel for wishbones and engine mounts.
Most annoying bit so far: Generator packing up half way through welding.
Reply With Quote
  #6  
Old 9th February 2011, 09:29 PM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Use original Sierra and change later.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote
  #7  
Old 10th February 2011, 09:07 PM
mark mark is offline
Senior Member
 
Join Date: Mar 2009
Location: Billingham (north east)
Posts: 770
Default

Quote:
Originally Posted by David_17 View Post
Anyone got ideas on how to 'pad' a wheel for iva?
As Paul says use sierra wheel and then change afterwards, its one less thing to worry about on your iva test, the sierra wheels aways seem to go through no probs

If i remember right you didnt have donor, so if you need a sierra wheel let me know as i have my old one, free if you want it and im only 5mins from your build
Reply With Quote
  #8  
Old 10th February 2011, 10:02 PM
Tilly819 Tilly819 is offline
Senior Member
 
Join Date: Oct 2008
Location: Leicestershire
Posts: 489
Default

i got same hard rubber cut it to shame, rapped in vynel leather cloth then attached with Velcro, my tester said it has to be shore 50 or higher IIRC

hope this helps
tilly
Reply With Quote
  #9  
Old 15th February 2011, 01:49 PM
fabbyglass
 
Posts: n/a
Default

Can't you just use the Sierra wheel anymore then? It's much hugeness lets you have all manner of spikey things as long as they are within the radius tested so a massive wheel lets you get away with more.....at least it used to


But then how do you manage to smack yer noggin on a steering wheel while you are wearing a harness....bit daft if you ask me unless you have a go go gadget head
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:37 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.