#1
|
|||
|
|||
What sealant to use?
Hi, what sealant does everyone use to seal between the aluminium floor/panels and the chassis rails?. I'm sure someone's said that acrylic sealer damages the panels over time, so do I need to use polyurethane based sealant?.
I see fabby mentioned Sikaflex, I can get EBT for £7.14 locally from S/Fix if that does the trick. Anybody else recommend this make, thanks Dave. |
#2
|
|||
|
|||
i used this stuff from toolstation it sticks like buggery to anything...including hands boots etc etc...i glued to bits of ally together with it and had to rip them apart to break the seal......cheap too !!
http://www.toolstation.com/shop/Adhe.../sd2350/p67949 |
#3
|
||||
|
||||
You could try Everbuild Stixall, comes in white or clear and it soes what it says on the tin, namely stix all. Will even cure under water. Available from several sources but best price I found was on evilbay.
D.
__________________
visit my website at www.cossie.davenewell.co.uk |
#4
|
||||
|
||||
I used a product called omniseal that I got from my local autofactors. Basically any PU adhesive should do the trick.
Cheers Dave
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt |
#5
|
||||
|
||||
Tigerseal is good stuff, not cheap tho.
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. |
#6
|
|||
|
|||
Thanks all for the input, will google all these and get sorted out tomorrow, Dave.
|
#7
|
||||
|
||||
I got some from ebay it was advertised as a sikaflex equivalent and it did the job very well, it was £8.10 for 2 tubes inc postage
|
#8
|
|||
|
|||
we use stikaflex on the bentleys to bond windscreens in and seal spare wheel wells with all the fuel pumps in etc
bloody good stuff
__________________
theres a box ! im not allowed in it ! i have to think outside ! |
#9
|
|||
|
|||
sealant
Thanks fellas, finally sorted, I got some Mapeflex PU45 in grey at £6.93 ea. from S/Fix, should be OK, Dave.
|
Thread Tools | |
Display Modes | |
|
|