#11
|
|||
|
|||
I am pretty sure if you hunt around on here there are PDF drawings of that rollcage shown in the thread above.
The steel is around £15-20 a meter for CDS to the right spec... The bends must be rotary drawn or manderal bent to meet FIA spec which is the only reason I am getting it bent for me really. If I was purely using it for track days I would defo make it myself. But I am was hoping to get a few races in 750mc RGB this year
__________________
http://m1kemph.wordpress.com<---- build blog clicky Check us out on facebook. Hamlet Engineering Services limited |
#12
|
||||
|
||||
Roll Cage
Somebody on here did these. hope this might help.
__________________
Be Lucky, Mike. |
#13
|
|||
|
|||
excellent, thanks for all your help. I think I will go with this rollcage. I really like the look of it. Although not FIA compliant it should be ok for hillclimbing and give more protection than a single roll bar.
Cheers
__________________
My Blog : leroysroadster.wordpress.com |
#14
|
||||
|
||||
there the drawings i have, They were on a previous post / thread
__________________
My Blog: deannoshaynesroadster.wordpress.com (under construction) Being overtaken is a sign of weakness. South Wales Kit Car Club www.southwaleskitcarclub.co.uk WWW.HELPFORHEROES.ORG.UK XBox Gamer tag: D34NNO |
#15
|
||||
|
||||
Good to see the drawings are still floating around on here.
Have a look at my photobucket account if you want to see some of the cage finished on the chassis. Cheers Dave
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt |
Thread Tools | |
Display Modes | |
|
|