|
|
#11
21st April 2011, 11:21 AM
|
||||
|
||||
There are proper angles to mount harness...
  It's like FIA rules or something... so I think IVA/SVA rules should be similar...
__________________
Lucas ZX9R BEC Haynes Roadster - build cost so far: £1125 My build thread "Whatever you can do or dream you can, begin it. Boldness has genius, power, and magic in it." J.W.Goethe 
|
|
#12
21st April 2011, 11:33 AM
|
|||
|
|||
|
Ours are not mounted on the roll bar they are mounted on the top chassis tube, most cars of this type are done this way.
CM
__________________
Built February 2009 using Mx5 components.
|
|
#13
21st April 2011, 01:45 PM
|
|||
|
|||
|
Mount them to the chassis rather than the roll over bar. Have a look at Westfield etc as these are all done like that.
We have Triton seats fitted and Mark drew up a quick how to do it guide for mounting the belts on the chassis for us. CM
__________________
Built February 2009 using Mx5 components. Last edited by cornishmaid : 21st April 2011 at 01:51 PM.
|
|
#14
21st April 2011, 09:44 PM
|
|||
|
|||
|
Ginetta ones are fitted to top seat back rail with a weld only and no mounting bracket
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
