New North Lincs Member.

[jaykay]

Well, I thought I would introduce myself.

I have been loitering for a while and taking as much in as I can. I think the bug has bitten me, and its likely I will be starting my own roadster soon. I have a couple of other projects in the workshop to do first.

I am ex motor trade and am lucky to have a very large home workshop and most of the tools I think will be required.

My aim is to do this at the lowest possible cost, famous last words ?

Are there any other members with ongoing or completed projects in north lincs/Hull ?

[davylock]

Originally Posted by jaykay

Well, I thought I would introduce myself.

I have been loitering for a while and taking as much in as I can. I think the bug has bitten me, and its likely I will be starting my own roadster soon. I have a couple of other projects in the workshop to do first.

I am ex motor trade and am lucky to have a very large home workshop and most of the tools I think will be required.

My aim is to do this at the lowest possible cost, famous last words ?

Are there any other members with ongoing or completed projects in north lincs/Hull ?

Sorry you didn't mention your name, I'm located near Beverley, 10K north of Hull, my chassis needs the rear tubes, harness fixings, and scuttle making up, then about to start assembling the refurb'd running gear.
This is a good forum, with answers to most questions asked and a bit of banter thrown in, best of luck on your project, Dave.

[michael92]

hey there! unfortunately im not north Lincs but im from the Boston area,
Im currently half way thru my chassis . In fact as we speak im out in the garage now doing the gear tunnel !

I look forward to seeing your roadster !


Michael

[jaykay]

Originally Posted by davylock

Sorry you didn't mention your name, I'm located near Beverley, 10K north of Hull, my chassis needs the rear tubes, harness fixings, and scuttle making up, then about to start assembling the refurb'd running gear.
This is a good forum, with answers to most questions asked and a bit of banter thrown in, best of luck on your project, Dave.

Thanks Dave,

I'm Jason and from Hull originally. I live just over the bridge in Goxhill.

What doner are you using, and how long since you started the build ?

[HandyAndy]

A warm welcome to the forum Jason

Lots of great info & very helpful members here, best wishes for your build.

cheers
andy

[jaykay]

Originally Posted by HandyAndy

A warm welcome to the forum Jason

Lots of great info & very helpful members here, best wishes for your build.

cheers
andy

Thanks Andy,

I may well start off with one of your flatpack kits. Seems a sensible way to go.

[davylock]

Originally Posted by jaykay

Thanks Dave,

I'm Jason and from Hull originally. I live just over the bridge in Goxhill.

What doner are you using, and how long since you started the build ?

Hi Jason, not too far away then, I'm originally from Hull and moved out here 28years ago. I started my build in January when I managed to get a ready built ( Talon crafted ) chassis off a lad who lost his workshop space and bought the Sierra running gear off a tuning shop who just wanted the box and engine, everything else from either Talon or Saturn ( both HIGHLY recommended ) ebay, and Vehicle Wiring Products, another fine firm.
I'm thinking of a new injected 1.6/1.8 Zetec whilst they are on offer, but not 100% certain yet cos of IVA. I can only do bits when I'm well as I'm a tad badly.
There used to be 2 other seven builders down my road, but I think one split up & moved. Your welcome to call over sometime, cheers. Dave.

[HandyAndy]

Originally Posted by jaykay

Thanks Andy,

I may well start off with one of your flatpack kits. Seems a sensible way to go.

No worries just give me a shout if you do decide on the flatpack kit route

Whichever route you take, all the best for your build & hope you enjoy the forum.

cheers
andy

[Neil P]

I have a finished car (well it's SVA'd, registered and on the road etc but still an ongoing project)I'm in Brough, so not far away if you want to have a look round it some time.

Neil

[jaykay]

Originally Posted by Neil P

I have a finished car (well it's SVA'd, registered and on the road etc but still an ongoing project)I'm in Brough, so not far away if you want to have a look round it some time.

Neil

Sounds good Neil, thanks for the offer. I will give you a shout in a while when I'm nearer to starting.

I need to get a couple of other jobs done first. MX5 to mot and VIC then ready for sale, and a new lump to do in my old x-type diesel.