#1
|
|||
|
|||
gearbox gumph
Being the sad bastard i am i stumbled across this.
http://www.zetecinside.com/xr2/gearbox.shtml Thought it might be useful to some . Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 |
#2
|
|||
|
|||
its a copy from burton
|
#3
|
|||
|
|||
oh quick pointer fwd clutches only from fwd cars with the mtx75 type gearboxes are any good for type9's with a std zetec flywheel (all have a diffrent pedal ratio)
early mondeo with 1.8 engines as thay have the spline fitting we want there is a diffrent option take a std cvh 1.8 flywheel and clutch reem the holes to suit and fit a trigger wheel to the front pully to run ign/ecu (no trigger on back of flywheel) the cvh flywheel is lighter but the clutch is way heaver to so thay turn out to be the same roughly as a zetec with clutches fitted Last edited by baz-r : 26th July 2011 at 07:48 PM. Reason: extra info |
#4
|
|||
|
|||
your not a sad bastard , your a very helpfull man thanks!
|
Thread Tools | |
Display Modes | |
|
|