|
|
#32
10th August 2011, 02:55 PM
|
|||
|
|||
There is nothing in the testing guide that states "You must have x y or z hoses fitted" so as Mark B has rightly stated the tester was not right.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. 
|
|
#34
29th August 2011, 07:03 PM
|
|||
|
|||
|
if you want o.e. spec hoses i found some to fit buy going using my local autofactors books all about £4 each ex vat
fronts 475mm long (total length) m10x1 bukhead df to short m10x1 exactly same as sierra hose caliper end (sierras dont have dobble flare/convex ends) veco vr866 think it fits a sherpa van but cant get cross ref no. (anyone) rears 500mm long (total length) m10x1 bulkhead df both ends slightly on the long side veco vr300 qh bfh4140 firstline fbh1464 fit meny ford cortinas and p100's df= dobble flare or convex
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
