#11
|
||||
|
||||
Quote:
Might be able to get the car rolling for Saturday, clutch is seized though...... Many Thanks.....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#12
|
||||
|
||||
andy, if the clutch apears siezed, it may just be wear on the clutch basket, it happens to motocross bikes all the time when their thrashed and left for a while. The basket gets little ridges worn onto where the plates slot into it. Usually a dismantle and a light filing sorts it out.
__________________
A few build photos... www.photobucket.com/ntsengineering |
#13
|
|||
|
|||
i bet the clutch will be fine once the engine is running and the drive line is in almost all bike clunk and jolt the chain when thay first select first when cold.
top tip only and only put bike oil in a bike engine with a wet clutch or it will soon be slipping! |
#14
|
||||
|
||||
Quote:
Cheers....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
#15
|
||||
|
||||
Just checking
Hi Andy
Just to double check before I go & package the wrong parts up It is the shaft ends that you need ( Pictured left ) & not the driveshaft flanges ( Pictured right ) I'll get them sent today, with a little luck, should be with you tomorrow
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk |
Thread Tools | |
Display Modes | |
|
|