Full cage

[mikemph]

That is fantastic information... I have emailed various people trying to get clarification on this issue with bends in the front hoop.

Looks like I am going to cut the lower legs of mine and mount it to the scuttle area some how

[flyerncle]

I trawled through the drawings last night and the text and it would appear that the front legs can be straight and in one hoop,Westfield and Caterham offer cages with this fitted but there is a brace to triangulate it at the front.

I would be tempted to make a full roll hoop from the floor behind the driver braced to the rear top mounts etc to use for racing.

[CTWV50]

http://www.nuweldsectionbenders.com/ sent me this quote for ERW


To supply and bend - 50.8x3.2 erw tube as in drawing one 1x 148.00
To supply and bend - 50.8x3.2 erw tube as in drawing two 1x 76.00
To supply and bend - 50.8x3.2 erw tube as in drawing three 2x 33.00
To supply tube only, for drawing four 2x 9.50
To supply tube only, for drawing five, undrilled etc 1x 12.00
Net £321.00
VAT £64.20
Total £385.20

[CTWV50]

Originally Posted by CTWV50

http://www.nuweldsectionbenders.com/ sent me this quote for ERW


To supply and bend - 50.8x3.2 erw tube as in drawing one 1x 148.00
To supply and bend - 50.8x3.2 erw tube as in drawing two 1x 76.00
To supply and bend - 50.8x3.2 erw tube as in drawing three 2x 33.00
To supply tube only, for drawing four 2x 9.50
To supply tube only, for drawing five, undrilled etc 1x 12.00
Net £321.00
VAT £64.20
Total £385.20

If anyone is interested in ordering the above from these guys speak to Paul. I can supply the pdf file quote and drawing if anyone needs them.

Cheers

Chris

[Ricky]

Hi I would like to know if I could get those drawings from you if you don't mind rjt.correia@gmail.com please

[CTWV50]

All the drawings can be found here

http://www.haynes.co.uk/forums/showt...ight=roll+cage

[Front Row Joe]

Does anybody know if 3ge components (original poster) is still operating? Their website doesn't seen to be working. If you have contact details even better. Thanks.

[will_08]

No they dont, but see this post

http://www.haynes.co.uk/forums/showthread.php?t=6626

Will

[CTWV50]

Hi another update on possible suppliers for this. This email quote is from

http://www.tube-bender.co.uk/

It is for a flat pack of the cage we have been talking about but without the side protection bars, with a diagonal rear hoop brace and in 38.1mm CDS which was what I specced as I don't need it to be MSA approved but didn't want to use ERW.

Hi Chris,

Thank you for your email.

The entire cage would be supplied in 38.1mm OD x 2.64mm Wall CDS as per your previous email. If you need different sizes it is not a problem, please let me know.

The price below is for the front hoop, back hoop, 2 connectors from the front hoop to the back hoop, the rear stays along with a diagonal rear brace.

It would total £290 plus £30 delivery.

If you would like to go ahead then please let me know and I will send you my Bank details. I will then produce my 3D CAD drawings and send them to you, just for your piece of mind.

Turn around time is around 3-5 days.

Let me know what you think.

I look forward to hearing from you.

Many Thanks
Tom Wood
Director

If your interested then please contact him.

Cheers

Chris