Rivets

[Deanno]

i should not think that would be a problem.

[will_08]

Cool didnt realize Rs did them, ive looked everywhere for closed ally rivets

On another note if I was using 2mm ally chequer plate on 2mm box section would 3.2mm to 4.8mm grip range be ok or would you go for 6.4mm to 7.9mm?

Cheers Will

[Deanno]

personally i'm going for double the thickness plus about 1mm more to allow for the sealant.

[mgglep]

hi there i used steel 4.8mmx12mm or (3/16x1/2 in old money) i used sealed rivets with adhesive sealent to prevent the electrolitic action of the ally and steel at 50mm pitch