|
|
#1
20th September 2012, 10:54 PM
|
||||
|
||||
going for the air box plenum
right after much deliberation, research etc i have decided to go for an airbox for my motorbike carbs. i have made an air box and rolled the front cover so it is rounded in shape i have also tapered it so it speeds the air up i have included a 75mm opening at the front which works out as a larger area than the 4 openings on the carbs i am going to use one of these at the front
http://www.ebay.co.uk/itm/89mm-Inlet...#ht_2047wt_932 it should be interesting to see what and if it makes any difference to the performance or sound of the induction i will put some pics up as soon as it it finished.
__________________
17.07.10 "Now i know the meaning of life" My Build pics http://www.flickr.com/photos/67605695@N04/ http://www.flickr.com/photos/97412063@N08/ 
|
|
#2
22nd September 2012, 07:44 PM
|
|||
|
|||
|
Dont forget to use the water pipe to heat the manifold on the carbs as they may freeze up if you dont.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
