#1
|
|||
|
|||
Harness top mount covers - what are you using?
My car is pretty much ready for IVA, apart from covers for the harness top mounts, and its beginning to pi$$ me off!
I can't find covers that will actually go over the top mounts of my Sabelt harnesses. I've tried the Pajero ones on eBay, but they are nowhere near wide enough. I tried emailing Sabelt directly (twice!), and got no reply. What have you guys found that works? Cheers Adrian |
#2
|
||||
|
||||
Nut cap on the bolt and edge trim on the plate?
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#3
|
|||
|
|||
Ash's car failed IVA at the same test centre I'll be using with a nut cap and trim, so I'm trying to find an alternative.
Cheers Adrian |
#4
|
||||
|
||||
i used a piece of black vinyl fabric. Bolt through the middle, sown across one side and press stud the other to get to the bolt, passed IVA with no problems,
__________________
http://s50.photobucket.com/albums/f340/sid15/Kit/ |
#5
|
||||
|
||||
__________________
http://s50.photobucket.com/albums/f340/sid15/Kit/ |
#6
|
||||
|
||||
Having got round the seat belt problem did it then fail on not having any triangulation on the roll bar?
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#7
|
|||
|
|||
Is it a testable item as its not used for the seat belt mounting,as long as it conforms to projections,sharp edges etc.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#8
|
||||
|
||||
Ah yes I see your point, sorry I missed that the belts where not mounted to it.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#9
|
||||
|
||||
Next year for sprinting I'm changing the roll bar and possibly having a removable brace bar from it into the passanger footwell which defiantly wouldn't pass IVA!
__________________
http://s50.photobucket.com/albums/f340/sid15/Kit/ |
Thread Tools | |
Display Modes | |
|
|