IVA Covers for track rod end and drag link?

[skov]

Any ideas what I can use to IVA-proof the top ball joints and track rod ends?
Ta,

[will_08]

Might be off at a tangent here, but i think ive seen people using the shroud's of steel wire armoured glands on locostbuillders?

[Davidbolam]

Originally Posted by skov

Any ideas what I can use to IVA-proof the top ball joints and track rod ends?
Ta,

for the top ball joints ive seen a large nut cover split with the rounded end removed. This is how they did it on the westfield from a race car is born. For the track rod ends you could use large heatshrink??

[baz-r]

gland covers from SWA cable glands work great and look spot on

if your lazy you can buy them from kitspares http://www.kitspares.co.uk/shop/item.php?product=5093

thay are a little longer than some of the gland covers i have seen and the track rod one you can cut the large end off to use for the outer nut so both are coverd

[skov]

Originally Posted by baz-r

gland covers from SWA cable glands work great and look spot on

if your lazy you can buy them from kitspares http://www.kitspares.co.uk/shop/item.php?product=5093

thay are a little longer than some of the gland covers i have seen and the track rod one you can cut the large end off to use for the outer nut so both are coverd

Perfect

Thanks all!