|
|
#1
27th April 2013, 04:17 PM
|
||||
|
||||
Front shock brackets, book wrong again?
The two front shock brackets on the chassis, the centre holes should be 300mm from the base but the measurement from the base to top rail is 355mm minus 25mm for the thickness of the top rail minus 27mm for the sock bracket to centre hole = 303mm?
I know it's only 3mm but does this matter or do I need to fit a 3mm packer under the bracket? 
|
|
#2
27th April 2013, 06:45 PM
|
||||
|
||||
|
It will make no difference really. 3mm here = about 1.5mm shock length difference and 3mm wheel travel. Tyre wear would account for more.
 Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024
|
|
#3
27th April 2013, 11:17 PM
|
||||
|
||||
|
Quote:
|
|
#4
28th April 2013, 12:14 AM
|
||||
|
||||
|
I'm going to be using a length of metal from the lower wishbone mount to position it properly.
Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
